Mens Boots

Danner's Portland made Bull Run is a utilitarian work boot with a timeless design, Built with a full-grain leather upper and finished with the sturdy Danner Wedge outsole for all-day comfort.  Once in our factory, the boot uppers are formed and the entire bottom of the boot is constructed by hand, giving us greater control over the finished product. This manufacturing process allows us to bring you a less expensive USA made boot without compromising the quality you expect from Danner.

Details

• Full-Grain, Oiled Leather Upper.
• Danner Wedge non slip outsole with removable OrthoLite Footbed
• Stitchdown Construction for  increased stability underfoot.
• Portland made using their 503 last.
• Fits true to size
• Backed by the Danner 365-Day Warranty

Red Wing Classic Chukka's origins were meet the needs of indoor workers, providing them with a work boot for indoor work where a lighter weight comfortable boot is more comfortable with a pliable sole better suited for bending, climbing and kneeling and wouldn't scratch or mark a wood floor. 

The Chukka's laid back understated appearance and cushioned comfort belied it's rugged triple stitch construction, with Goodyear Welt, Atlas Tred rubber outsole and durable long wearing Oro-Iginal leather  

Details

• 3140 Work Chukka
• Oro-Iginal Oil Tanned leather
• Traction Tred crepe wedge outsole
• Goodyear Welt Construction. Suitable for resoling
• Nickel Eyelets
• 32" Taslan lace
• Made in USA

Sizing

• Built on Red Wing's no.210 last first used in the 1950's
• True to size. Most of our customers purchase their regular US size.
• When purchasing a heritage style work boot it is important to get a snug fit. This will allow the boot to mould and adapt to your foot and prevent heel slippage. Just make sure you can still wiggle your toes though. After all comfort is what it's all about. 

The Leather

Oil tanned leather is exceptionally durable as well as being naturally water, stain and perspiration resistant. It also provides a more natural look and feel because less finishing materials have been applied, allowing its natural beauty to shine through. Oil-Tanned leather has been used to build countless work boots throughout Red Wing’s 110+ year history.   

Goods Care 

Show a little love to your Red Wing boots and they will repay you ten fold. Regular cleaning, and protecting will prolong the life of your boot and keep the leather soft and well conditioned. For most of us, one pair of these boots should last close to a lifetime. 
A good dry brush is often enough to remove dust but for bigger jobs we recommend Red Wing Leather Cleaner. Once dry always  re condition and protect with Red Wing All Natural Boot Oil . Red Wing Mink Oil is also a popular choice with many of our customers who prefer the added protection of Silicon and Lanolin

The classic Moc Toe boot is synonymous with Red Wing's heritage. The 9075 gives a nod to that heritage and the original 1950's Moc Toe work boot. The 6" 7 eyelet boot is constructed from Black Harness leather, with a white Traction Tred rubber outsole and of course Goodyear Welt construction.

Details

• Black Harness Oil Tanned leather
• Traction Tred crepe wedge outsole
• Goodyear Welt Construction. Suitable for resoling
• Nickel Eyelets
• 48" Taslan lace
• Made in USA

Sizing

• Built on Red Wing's no.23 last. Created in the 1950's it is possibly Red Wing's most iconic last.
• The Moc Toe has extra room in the forefoot (toe area) and instep which allows easier entry to the shoe.
• Most of our customers purchase 1/2 to one full size smaller than their normal size.

When purchasing a heritage style work boot it is important to get a snug fit. This will allow the boot to mould and adapt to your foot and prevent heel slippage. Just make sure you can still wiggle your toes though. After all comfort is what it's all about. 

The Leather

Oil tanned leather is exceptionally durable as well as being naturally water, stain and perspiration resistant. It also provides a more natural look and feel because less finishing materials have been applied, allowing its natural beauty to shine through. Oil-Tanned leather has been used to build countless work boots throughout Red Wing’s 110+ year history.   

Goods Care 

Show a little love to your Red Wing boots and they will repay you ten fold. Regular cleaning, and protecting will prolong the life of your boot and keep the leather soft and well conditioned. For most of us, one pair of these boots should last close to a lifetime. 

A good dry brush is often enough to remove dust but for bigger jobs we recommend Red Wing Leather Cleaner. Once dry always  re condition and protect with Red Wing All Natural Boot Oil . Red Wing Mink Oil is also a popular choice with many of our customers who prefer the added protection of Silicon and Lanolin

The Story

The Moc Toe was originally conceived for Sportsmen in 1950's. shortly afterwards farm and factory workers took to the boots for their all-day comfort and lasting durability. The crescent-shaped toe stitching is inspired by the construction of moccasins originally worn by the North American Algonquin Indians.

The Red Wing Moc Toe features six inches of premium Red Wing Oro Legacy leather combined with Goodyear welt construction, a Traction Tred rubber outsole and triple stitched quality.

The classic Moc Toe boot is synonymous with Red Wing's heritage. The 875 gives a nod to that heritage and the original 1950's Moc Toe work boot. The 6" 7 eyelet boot is constructed from Oro-Legacy leather, with a white Traction Tred rubber outsole and of course Goodyear Welt construction.

Details

• Oro Legacy Oil Tanned leather
• Traction Tred crepe wedge outsole
• Goodyear Welt Construction. Suitable for resoling
• Nickel Eyelets
• 48" Taslan lace
• Made in USA

Sizing

• Built on Red Wing's no.23 last. Created in the 1950's it is possibly Red Wing's most iconic last.
• The Moc Toe has extra room in the forefoot (toe area) and instep which allows easier entry to the shoe.
• Most of our customers purchase 1/2 to one full size smaller than their normal size.

When purchasing a heritage style work boot it is important to get a snug fit. This will allow the boot to mould and adapt to your foot and prevent heel slippage. Just make sure you can still wiggle your toes though. After all comfort is what it's all about. 

The Leather

Oil tanned leather is exceptionally durable as well as being naturally water, stain and perspiration resistant. It also provides a more natural look and feel because less finishing materials have been applied, allowing its natural beauty to shine through. Oil-Tanned leather has been used to build countless work boots throughout Red Wing’s 110+ year history.   

Goods Care 

Show a little love to your Red Wing boots and they will repay you ten fold. Regular cleaning, and protecting will prolong the life of your boot and keep the leather soft and well conditioned. For most of us, one pair of these boots should last close to a lifetime. 
A good dry brush is often enough to remove dust but for bigger jobs we recommend Red Wing Leather Cleaner. Once dry always  re condition and protect with Red Wing All Natural Boot Oil . Red Wing Mink Oil is also a popular choice with many of our customers who prefer the added protection of Silicon and Lanolin

The Story

The Moc Toe was originally conceived for Sportsmen in 1950's. shortly afterwards farm and factory workers took to the boots for their all-day comfort and lasting durability. The crescent-shaped toe stitching is inspired by the construction of moccasins originally worn by the North American Algonquin Indians.

The original Danner Light was introduced in 1979, the golden era of backpacking and set the standard for Gore Tex Liners.This classic-inspired boot features stitchdown construction and a Vibram Kletterlift outsole for stable traction on a variety of terrain. The Danner Light Khaki is still built by hand, using leathers as close to the original as possible in Danner's Portland, Oregon factory and includes denier nylon panels and a waterproof GORE-TEX liner.

 Details

• Full grain leather & 1000 Denier nylon upper.  Made from a combination of Danner's premium full-grain leather and 1000 Denier nylon, this upper is extremely durable.
• Gore Tex .(GTX) 100% waterproof and breathable, GORE-TEX liners ensure that no water gets in, while allowing sweat and moisture to get out.
• PU Midsole. With integrated polypropylene board to provide support underneath the entire length of the foot.
• Vibram® Kletterlift Outsoles. Specifically designed for comfort and durability; the heel provides superb shock absorption and the Vibram® Megagrip compound guarantees great traction and stability on both wet and dry surfaces.
• Stitchdown Construction. Handcrafted to provide a wider platform, Danner's legendary stitchdown construction offers increased stability underfoot.
• Made in USA, Portland Oregon

 Fit notes

• 650 last. Offers a sleek, slender profile with a more narrow fit. Boots on this last tend to fit those with a more narrow foot better than those with a wider foot. This ensures a snug fit for terrain and activities that demand support and stability.
• True to size.
• 6" Height 1.7kg per pair

 The Red Wing Iron Ranger is a genuine American icon. Originally conceived for the early 20^th Century mining communities of Minesota, It’s strong aesthetic and practical features have seen it worn by every generation since. With it's double layered toe cap, speed hooks, and now Vibram® outsole it’s stood the test of time. Like all Red Wing Heritage product it's constructed with a Goodyear welt sole and can be resoled time and time again. 

Details

• Amber Harness Oil Tanned leather
• Vibram 430 Mini-lug sole
• Goodyear Welt Construction. Suitable for resoling
• Double layer toe cap
• Steel Shank for added support
• Nickel eyelets and hooks
• 48 " Taslan lace
• Made in USA

Sizing

• USA Mens Sizing
• Built on Red Wing's no.8 last, one of the oldest lasts still most frequently used Red Wing lasts . 
• Most of our customers purchase 1/2 to one full size smaller than their normal size.
• Bump toe allows for extra toe room

When purchasing a heritage style work boot it is important to get a snug fit. This will allow the boot to mould and adapt to your foot and prevent heel slippage. Just make sure you can still wiggle your toes though. After all comfort is what it's all about. 

 The Leather 

The Amber Harness leather is supplied exclusively to Red Wing by Oil tanned leather specialists S.B Foot Tanning Co.
Oil tanned leather is exceptionally durable as well as being naturally water, stain and perspiration resistant. It also provides a more natural look and feel because less finishing materials have been applied, allowing its natural beauty to shine through. Oil-Tanned leather has been used to build countless work boots throughout Red Wing’s 110+ year history. 

 Goods Care 

Show a little love to your Red Wing boots and they will repay you ten fold. Regular cleaning, and protecting will prolong the life of your boot and keep the leather soft and well conditioned. For most of us, one pair of these boots should last close to a lifetime. 
A good dry brush is often enough to remove dust but for bigger jobs we recommend Red Wing Leather Cleaner. Once dry always  re condition and protect with Red Wing All Natural Boot Oil . Red Wing Mink Oil is also a popular choice with many of our customers who prefer the added protection of Silicon and Lanolin

 The Story

The early history of iron mining on Minnesota’s Mesabi Range is intertwined with that of Red Wing Shoe Company. The miners needed tough but comfortable boots that could stand up to the long days and tough conditions a northern Minnesota mine pit presented. Red Wing responded with a boot made of thick leather with an oil resisting outer sole, speed lacing hooks, and a comfortable cork midsole. The defining characteristic of these boots though, was their double layered toe, capped to protect the miner’s feet from injury as they labored with hand tools and heavy machinery. Still made today, the fittingly named Iron Ranger represents not only Red Wing’s commitment to making boots for working men and women but also its Minnesota origins.

The Danner Mountain 600' combination of Vibram SPE midsole and Fuga outsole gives unparalleled grip on wet and dry surfaces while still providing superior cushioning without excess weight. Designed to withstand the climate and terrain of the Pacific Northwest, it features a smooth full grain leather upper and Danner Dry waterproof protection. A key part of Danner' Performance Heritage Range, combining classic styling with lightweight innovation. The second lace option included with this boot is brown.

Details

• Full grain leather upper.
• Danner Dry 100% waterproof barrier allows moisture to escape without letting water in, keeping your feet dry and comfortable all day long.
• Removable Ortholite Footbed. Three layers of varying density are combined for maximum cushioning and support. The entire footbed is made of open-cell polyurethane for better heat dissipation and air circulation.
• Vibram Spe Midsole.The rubberized EVA midsole maintains the same cushioning properties as traditional EVA, increasing rebound comfort and support but with increased durability.
• Vibram Fuga Outsole. Self-adapting lugs and specially formulated Megagrip compound, give the outsole incredible grip on both wet and dry surfaces.

Fit notes

• Designed for versatility this last was built to offer enough room for comfort while maintaining a sleek profile
• Ortholite footbed included
• Fits slightly large and we recommend sizing down a half size for best fit.

Made in their Portland, Oregon, factory, the Mountain Pass was created to be a lighter weight and more versatile hiking boot that still reflects classic Danner styling. Built with light hikes and city streets in mind, the overall design is inspired by the original Mountain Light with an updated construction method that integrates the shank, midsole and lasting board into a single piece. This new unified platform allows for significant weight reduction and creates an out-of-the-box comfort that doesn't come standard with most classic hiking boots. Breathable CORE-TEX lining and Thinsulate keep feet warm and dry in slush and snow. The Vibram Arctic Grip sole was designed to keep your footing secure on wet ice, frozen ground or whatever the colder months have in store.

Details

Take a seat, prepare a mug of your favourite brew and delve deeper, there's a lot to take in...

• Full Grain Leather Upper. To ensure quality, Danner put their leather through six different tests before making a selection.
• Gore Tex. (GTX) 100% waterproof and breathable liners ensure that no water gets in, while allowing sweat and moisture to get out.
• 200G Thinsulate Insulation. High performance insulation that keeps you warm in the snow and rain without weighing you down.
• Removable Ortholite Footbed. Three layers of varying density are combined for maximum cushioning and support. The entire footbed is made of open-cell polyurethane for better heat dissipation and air circulation.
• Bi Fit Board. By combining the shank, lasting board, and midsole into a single unified piece that is moulded to match the shape and contours of their boots, Danner are able to reduce a significant amount of weight from the boot without sacrificing support.
• Vibram Kletterlift thin outsoles. Specifically designed for comfort and durability for everyday use, while reducing height and weight from the traditional Kletterlift outsole.
• Stitch down Construction. Handcrafted to provide a wider platform, Danner's legendary stitch down construction offers increased stability underfoot.
• Made in USA, Portland Oregon.
• Colour: Black/Biking Red

Fit notes

• Fits true to Size
• Portland made 503 last. Provides a casual fit without compromising Danner's comfortable lace-to-toe construction.
• Weight 1.3kg per pair
• 5" height

Care

• Keep them clean. in most cases a clean or damp cloth will do the trick. When serious dirt or grime sets in use we recommend Red Wing or Otter Wax product.
• The only other job you have is to not let them dry out. A seasonal or yearly hit depending on their use of Red Wing Natural leather conditioner or similar and then get back out there.

Made in their Portland, Oregon, factory, the Mountain Pass was created to be a lighter weight and more versatile hiking boot that still reflects classic Danner styling. Built with light hikes and city streets in mind, the overall design is inspired by the original Mountain Light II with an updated construction method that integrates the shank, midsole and lasting board into a single piece. This new, unified platform, combined with a low profile Vibram outsole, allows for significant weight reduction and creates an out-of-the-box comfort that doesn't come standard with most classic hiking boots.

The Smores version comes with a white midsole and matt oiled finish with smart green laces ...at least we think they are smart!

 Details

Take a seat, prepare a mug of your favourite brew and delve deeper, there's a lot to take in...

• Full Grain Leather Upper. To ensure quality, Danner put their leather through six different tests before making a selection.
• Gore Tex. (GTX) 100% waterproof and breathable liners ensure that no water gets in, while allowing sweat and moisture to get out.
• Leather Lined Collar. Provides extra padding at the ankle for an easier break-in period.
• Removable Ortholite Footbed. Three layers of varying density are combined for maximum cushioning and support. The entire footbed is made of open-cell polyurethane for better heat dissipation and air circulation.
• Bi Fit Board. By combining the shank, lasting board, and midsole into a single unified piece that is moulded to match the shape and contours of their boots, Danner are able to reduce a significant amount of weight from the boot without sacrificing support.
• Vibram Kletterlift thin outsoles. Specifically designed for comfort and durability for everyday use, while reducing height and weight from the traditional Kletterlift outsole.
• Stitch down Construction. Handcrafted to provide a wider platform, Danner's legendary stitchdown construction offers increased stability underfoot.
• Made in USA, Portland Oregon.
• Dark Brown Colourway

Fit notes

• Fits true to Size
• Portland made 503 last. Provides a casual fit without compromising Danner's comfortable lace-to-toe construction.
• Weight 1.3kg per pair
• 5" height

Care

• Keep them clean. in most cases a clean or damp cloth will do the trick. When serious dirt or grime sets in use we recommend Red Wing or Otter Wax product.
• The only other job you have is to not let them dry out. A seasonal or yearly hit depending on their use of Red Wing Natural leather conditioner or similar and then get back out there.